Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

TFTP server on 2691 router

Dear Cisco techs,

Can someone please guide me to link on how to set up TFTP on 2691 router

When I type conf t.

tttp-server flash: is does nothing

Or tftp-server gives unrecognized command

Have searched quite a few places. Leads to various links but nothing conclusive. One directed me to a tftpdnld command but is for ios image updating only.

Want to update flash: with more files for ip phone

Why does cisco make this so difficult?

Thanks again :) 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

What happens if you do this:

What happens if you do this:  

 

config t

tftp flash:filename.extension

end

 

7 REPLIES
Hall of Fame Super Gold

It's suppose to be "tftp

It's suppose to be "tftp-server flash:filename.extension".

Purple

Hi John, You can also refer

Hi John,

 

You can also refer the link

 

https://supportforums.cisco.com/document/9541/how-configure-cisco-router-tftp-server

 

regds,

aman

Community Member

Is this for phone firmware as

Is this for phone firmware as well as link above only shows for ios images. 

When I do tftp-server flash: filename.extension ..comes back with unrecognised command

Hall of Fame Super Gold

This should work for any file

This should work for any file.  

You're getting error message?  Hmmmm ... Are you doing this is global configuration mode?

Community Member

No . Thanks for prompt

No . Thanks for prompt response Leo..:)

Hall of Fame Super Gold

What happens if you do this:

What happens if you do this:  

 

config t

tftp flash:filename.extension

end

 

Community Member

Thanks Leo. I wasn't in

Thanks Leo. I wasn't in global config mode. All this cisco stuff is very interesting and at time challenging. LUV IT

One more question if I may.

Sh clock keep referring back to year 2002 after being updated. I unplug router. Goes back to 2002. How can I keep it as current date?

NTP server has been set but not synchronised. 

Does NTP server control the sh clock command output?

63
Views
4
Helpful
7
Replies
CreatePlease to create content