Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Third Party Sip Device on UC540

I am an end user and currently have a UC540w with several cisco 7965G Phones.

I also have a Mobotix T24 door camera that uses Sip to connect and call the cisco phones.

Recently I changed the IP address of the mobotix camera to free up space on the pool list, and at the same time I also updated the UC to the latest version to rectify another issue.

There was previously a working configuration between them where the Door Station would call a blast group on the UC and all of the phones would be alerted.

The configuration has disappeared off the Door Station and I can no longer establish a connection between them.

voice register global 
 mode cme 
 source-address 192.168.0.251 port 5060 
 max-dn 56 
 max-pool 14 
 authenticate register 
 authenticate realm 192.168.0.251 
 hold-alert 
 voicemail 555 
 tftp-path flash: 
 create profile sync 0003158294275275 
!
 voice register dn 1 
 session-server 1 
 number 388 
 allow watch 
 name Camera 
 no-reg 
 label Camera 
 mwi 
! 
voice register pool 1 
 id mac 0000.0000.0388 
 number 1 dn 1 
 cor outgoing call-international default 
 username 388 password 12345 
 description 388 
 codec g711ulaw 
! 
voice hunt-group 1 parallel 
 final 333 
 list 300,301,302,303,304,305,306,307,308 
 timeout 20 
 pilot 511 
! 
! 
! 
! 
voice source-group CCA_SIP_SOURCE_GROUP_CUE_CME 
 access-list 2 
 translation-profile incoming SIP_Incoming 
! 
voice source-group CCA_SIP_SOURCE_GROUP_EXTERNAL 
 access-list 3 

And here is a screenshot of the accompanying Door Station configuration.

DoorStation.JPG

119
Views
0
Helpful
0
Replies
CreatePlease login to create content