I have a Polycom Soundstation IP 6000 that I'm trying to register to our CUCM 8.x server. Registration keeps getting rejected and I can't figure out what's going on. I've configured a digest user and associated the name on the phone configuration page. When looking at the trace files, I see the phone trying to register but I don't see any rejection error messages being sent by CUCM. I'm sure this is something simple that I am missing. Below is the output from my trace.
Please find attached a PDF document which provides you steps to configure a 3rd party SIP phone. Could you please verify the configuration to make sure everything is correct. Many a time, it is a simple configuration issue.
If it still fails, please collect detailed CM sdi/sdl traces, while enabling 'SIP stack trace' and 'SIP call processing trace' on the trace configuration page.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...