Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Third party SIP phone/soft phone configuration

Anyone have any experience with this or know of any documentation to help with the configuration of this?

I am using SJ Labs and X-Lite and can't get it working. Any help would appreciated.

Thanks,

Robert Raver

3 REPLIES
Green

Re: Third party SIP phone/soft phone configuration

I have SJ Labs and Xlite

For SJ Labs you need to go to advanced mode

http://cco/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b09sip3p.html

change cco for cisco.com

Im just going to post a doc in CCO

will upload the screenshots here.

Community Member

Re: Third party SIP phone/soft phone configuration

Pls Enable the Caller ID in the SJ phone..

Caller ID should match with the DN

It Should work ...

Thanks

Thilan

Silver

Re: Third party SIP phone/soft phone configuration

what error do you get,the main issue I`ve had is with the userID`s needing to match and if I remember they need to be numeric

196
Views
0
Helpful
3
Replies
CreatePlease to create content