Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Third-party SIP phone support in CME?

I found a few threads about 3rd-party SIP phone support in CM...but what about CME? I haven't found any official announcements or documentation on CCO or here in the forums. I'm running CME 4.0 and it definitely doesn't appear to be supported...maybe in a later version though?

Thanks ahead of time.

3 REPLIES
Hall of Fame Super Gold

Re: Third-party SIP phone support in CME?

Hi,

About one year ago, Cisco by word of their CCME TME, had said that "certification of third-party phones was in progress".

Since then, nothing has happened.

However, most models are know to work, at least for basic features.

Hope this helps, please rate post if it does!

New Member

Re: Third-party SIP phone support in CME?

Good to know. That being said, does anyone who has this working in CME (not CM) have any good links or documentation. Also what version of CME are you running? Documentation (as you would expect) for this seems to be non-existent so far.

Hall of Fame Super Gold

Re: Third-party SIP phone support in CME?

voice service voip

sip

registrar server

voice register global

mode cme

source-address x.x.x.x port 5060

voice register dn 1

number 29

voice register pool 2

id mac 0000.0000.0000

number 1 dn 1

username 29 password 1234

dtmf-relay rtp-nte

codec g711ulaw

no vad

Note: if the phone is local to CME LAN, replace the all zeros MAC with actual mac, and no need for username and password.

542
Views
3
Helpful
3
Replies