Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Time and Date Setting for SPA509G

We have one user whose phone does not display the correct date and time. 

We tried going into the phone's manual date and time update, and were able to get the time closer but setting it 18 hours off, but the minutes are still off as is the date.

Can you please advise how to fix this?  Our Phone admins said it's Verizon and there's nothing they can do.

Everyone's tags (2)
3 REPLIES
Green

Time and Date Setting for SPA509G

Hi,

Can you try this

Setting Your Phone’s Date and Time

The date and time for your phone normally come from the SIP proxy server or NTP

server. However, if you need to change some date and time parameters, you can

follow these steps:

STEP 1

Press the Setup button.

STEP 2

Select Time/Date.

STEP 3

Enter the date in the following format: mm*dd*yy (this will display as m/d).

STEP 4

Enter the time in the following format: hh*mm*ss (this will display as (h:mm).

STEP 5

If the time does not display am (a) or pm (p) correctly, adjust with Offset. To change

from a.m. to p.m., enter *12*00*00, to change from p.m. to a.m., enter #12*00*00.

STEP 6

Press save.

You can set just one of these choices, if necessary.

HTH

Alex

Regards, Alex. Please rate useful posts.
New Member

Re: Time and Date Setting for SPA509G

Dear Alex,

Wow that actually worked! We never would have figured that out on our own ☺

Thanks so much!

Amanda

Green

Re: Time and Date Setting for SPA509G

Amanda,

Glad to hear that this worked.

Regards

Alex

Please rate useful posts

Regards, Alex. Please rate useful posts.
943
Views
0
Helpful
3
Replies