We're running CUCM 6.0. Users are reporting a time differential between their IP phone and their computer/cell phone. The publisher is referenced to a NTP source and is OK. The problem is that the subscriber is not synchronized with the publisher, confirmed by ssh'ing into each server and using the command "utils ntp status". Is there a way to synchronize them or is this a bug?
Re: Time differential between IP phones and computer
1) The problem was reported in mid-August. It's cropped up before in the March/April time frame. (I think) the cluster was rebooted at that time and that seems to have resolved it. However it's probably been drifting since then.
(2) What is the CLI syntax to obtain the ntp.log file? I'm logged into the PUB and execute the command:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...