Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Time in callmanager 6

hai all,

How to set time in callmanager...

I created ntp server and ntp is accessible to callmanger, but still time in callmanger is not correct

In phones and in gateway(ntp server) time is correct

Do I need to change the time in BIOS

voice experts please suggest

5 REPLIES

Re: Time in callmanager 6

got the pblm

Current timezone: GMT+03:07 (Mideast/Riyadh89)

actually it is GMT+3

But for changing I need to restart callmanager....

using command :set timezone 278

Re: Time in callmanager 6

but what is the difference between

275 - Asia/Riyadh87

276 - Asia/Riyadh88

277 - Asia/Riyadh89

278 - Asia/Riyadh

any idea???

Hall of Fame Super Red

Re: Time in callmanager 6

Hi Eldho,

Interesting question for sure! Here is what I found (note the +7 minutes in each of the 87,88,89);

Check out this thread;

http://www.velocityreviews.com/forums/t543449-riyadh-timezone.html

Here are the offsets for each;

Asia/Riyadh

+3

Asia/Riyadh87

+3.07

Asia/Riyadh88

+3.07

Asia/Riyadh89

+3.07

From this good doc;

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/acns/v54/command/reference/8158appb.html

Hope this helps!

Rob

New Member

Re: Time in callmanager 6

Hi,

I also have the problem with my NTP Server in CallManager 6. Configuration follows:

admin:utils ntp status

ntpd (pid 21438) is running...

remote refid st t when poll reach delay offset jitter

==============================================================================

127.127.1.0 127.127.1.0 10 l 18 64 1 0.000 0.000 0.008

10.15.83.20 .LOCL. 1 u 5 64 1 0.980 -147200 0.008

unsynchronised

time server re-starting

polling server every 16 s

Current time in UTC is : Tue Mar 10 03:42:19 UTC 2009

Current time in Asia/Bangkok is : Tue Mar 10 10:42:19 ICT 2009

admin:utils ntp status

---------------

NTP is accessible But the actual time is 10:39:19.

Any ideas for me?

Thank.

New Member

Re: Time in callmanager 6

Try this command:

  • utils ntp restart

wait around 2 minutes and try again util ntp status

regards

Manu

716
Views
0
Helpful
5
Replies