Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Time is not correct on Cisco IP Phones.

Hi

I have CUCM 7 (Publisher and Subscriber) i set the timezone on both the Servers to Asia\Kuwait

and i also set the Data/Time Group in CUCM to Saudi arabia-( GMT +03:00)kuwait,

but on my Cisco IP Phones its showing 10 Mints behind from the standard time

Like now on my cisco ip phone its 12:56 pm but current time is 01:06:52 PM, Tuesday 13, April 2010

Please guide me to sort out this issue.

1 REPLY
Red

Re: Time is not correct on Cisco IP Phones.

If it's off for a couple minutes, then it's nothing to do with timezone.

Have you tried to reset the phone?

You may try the following:

1) Find out which CUCM server the phone is registered with.

You may find this information from CUCM > Device > Phone.

2) SSH into the CUCM server you found out in step 1 above/

3) Type command "utils ntp status" and post the output here.

4) Is the time in step 3 the same as the IP phone?

Thanks!

Michael

http://htluo.blogspot.com

361
Views
0
Helpful
1
Replies