Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Time-of-Day Routing in Call Manager / CUCM

Hi everyone! I need some advice on the Time-of-Day routing in Call Manager. I already went through most of the posts on Time-of-Day on this forum as well as the CUCM Systems Guide. Based on the suggestions, here is how I am planning to setup on my system:

My Scenario:

  • Old setup of CUCM that uses Partitions such as OnNet, Local, STD, etc (i.e. not scalable PT/CSS)
  • Shared line needs to go to mobile when no one answers (pretty easy – CFNA)
  • Same shared line needs to automatically go to an on-call mobile After Hours (Outside of M-F 9-5)

What I have done:

  • Setup a time schedule for After Hours and assigned it to a “After Hours” partition
  • Setup a Translation Pattern that lives in the “After Hours” Partition
  • Shared line lives in the “On Net” partition that everyone’s CSS has access to
  • Append everyone’s CSS to have the “After Hours” partition sit at the top of the list of Partitions (to make sure the Translation Pattern gets hit before the DN)

With this setup I will need to modify 35x CSS and add my new Partition to the top of each CSS' list of Partitions. Is there a better or easier way to set up my Scenario for automatic Time-of-Day routing (to a mobile after hours)?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Time-of-Day Routing in Call Manager / CUCM

This is the correct way to do it.

Chris

Sent from Cisco Technical Support iPhone App

1 REPLY
Hall of Fame Super Silver

Re: Time-of-Day Routing in Call Manager / CUCM

This is the correct way to do it.

Chris

Sent from Cisco Technical Support iPhone App

1334
Views
0
Helpful
1
Replies