07-26-2007 08:56 AM - edited 03-14-2019 10:47 PM
Hi all,
there is any option to use cor list with a time range?
07-26-2007 10:11 AM
Not really. If using CME, you can check if "after-hours" blocking would do for your needs, as it allow time-based configuration.
Hope this helps, please rate post if it does!
07-26-2007 02:41 PM
I know, but with after-hours configuration, i block fxo port too...
07-26-2007 03:24 PM
Actually it prevents certain phones from dialing certain calls starting with numbers you decide. FXO ports are not affected directly.
10-19-2012 06:40 AM
Hello,
I have a cme and I want some specific phones to call only internal number on non-working hours..
Do you have an idea how I can do this?
10-19-2012 09:36 AM
Use after-hours to achieve that. More information can be found at this link, http://voipnewb.blogspot.se/2009/08/cme-after-hours-call-blocking.html?m=1
Please rate all useful posts.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: