Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Time Synchronization issue on CUCM with NTP Server (Cisco Router)

Hello Experts,

We need your suggestion to configure Cisco 3800 Router as NTP Server and Syn with Cisco Call Manager to show correct time order on Cisco IP Phones.

There was a NTP Server before which is remove now but IP Phones are showing 30 min off from the Actual time.

We did Cisco 3800 as NTP server and added in CUCM as NTP Server but still time is showing different on Cisco IP Phones.

Please assist.

Thanks,

  • IP Telephony
Everyone's tags (2)
29 REPLIES

Re: Time Synchronization issue on CUCM with NTP Server (Cisco R

Can you please share output of "utils ntp status"

Thanks

Manish

VIP Purple

Re: Time Synchronization issue on CUCM with NTP Server (Cisco R

Hi Amin,

Can u share the output of command from Publisher ?

utils  ntp status

Secondly,after u added new NTP reference in call manager, did u restart using command utils ntp restart.

regds,

aman

New Member

Time Synchronization issue on CUCM with NTP Server (Cisco Route

Hello Experts,

Here is output of the command:

SUB

ntpd (pid 19311 19005) is running...

     remote           refid      st t when poll reach   delay   offset  jitter

==============================================================================

*127.127.1.0     127.127.1.0     10 l   34   64  377    0.000    0.000   0.015

synchronised to local net at stratum 11

   time correct to within 11 ms

   polling server every 64 s

Current time in UTC is : Sun Dec  1 06:46:13 UTC 2013

Current time in Mideast/Riyadh89 is : Sun Dec  1 09:53:17 zzz 2013

PUBLISHER

admin:utils ntp status

ntpd (pid 15948 15947 15623) is running...

     remote           refid      st t when poll reach   delay   offset  jitter

==============================================================================

127.127.1.0     127.127.1.0     10 l   30   64  377    0.000    0.000   0.008

*172.16.7.2      127.127.1.0     11 u   11   64  377    0.191    0.086   0.011

synchronised to NTP server (172.16.7.2) at stratum 12

   time correct to within 21 ms

   polling server every 64 s

Current time in UTC is : Sun Dec  1 06:44:40 UTC 2013

Current time in Mideast/Riyadh88 is : Sun Dec  1 09:51:44 zzz 2013

Thanks,

Re: Time Synchronization issue on CUCM with NTP Server (Cisco R

Any phone ntp references in date/time group ?

Thanks

Manish

New Member

Re: Time Synchronization issue on CUCM with NTP Server (Cisco R

Hello Manish,

Can you calrify This point ? "Any phone ntp references in date/time group ?

Thanks

Re: Time Synchronization issue on CUCM with NTP Server (Cisco R

System - Phone NTP References.

System - Date/Time Groups - xx_DTGrp - Phone NTP References.

VIP Purple

Time Synchronization issue on CUCM with NTP Server (Cisco Route

Hi Amin,

I was just refering the line from  SRND which says

Cisco highly recommends configuring the publisher to point to a Stratum-1, Stratum-2, or Stratum-3 NTP server to ensure that the cluster time is synchronized with an external time source.

can u run the command in Publisher

utils diagnose module ntp_stratum  and share the output.

utils diagnose test

regds,

aman

New Member

Re: Time Synchronization issue on CUCM with NTP Server (Cisco R

Hello Aman,

Here is the output:

admin:utils ntp restart

Restarting NTP

admin:utils ntp status

ntpd (pid 26616) is running...

     remote           refid      st t when poll reach   delay   offset  jitter

==============================================================================

127.127.1.0     127.127.1.0     10 l   14   64    3    0.000    0.000   0.008

*172.16.7.2      127.127.1.0     11 u   53   64    1    0.206    0.001   0.015

synchronised to NTP server (172.16.7.2) at stratum 12

   time correct to within 22 ms

   polling server every 16 s

Current time in UTC is : Mon Dec  2 05:07:27 UTC 2013

Current time in Mideast/Riyadh88 is : Mon Dec  2 08:14:31 zzz 2013

admin:

-----------------------------------

admin:utils diagnose module ntp_straum

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

Diagnostics Completed

admin:utils diagnose test

Log file: /var/log/active/platform/log/diag2.log

Starting diagnostic test(s)

===========================

test - disk_space          : Passed (available: 2324 MB, used: 10845 MB)

skip - disk_files          : This module must be run directly and off hours

test - service_manager     : Passed

test - tomcat              : Passed

test - validate_network    : Passed

test - system_info         : Passed (Collected system information in diagnostic log)

test - ntp_reachability    : Passed

test - ntp_clock_drift     : Passed

test - ntp_stratum         : Failed

The reference NTP server is a stratum 12 clock.

NTP servers with startum 5 or worse clocks are deemed unreliable.

Please consider using an NTP server with better startum level.

Please use OS Admin GUI to add/delete NTP servers.

Diagnostics Completed

New Member

Time Synchronization issue on CUCM with NTP Server (Cisco Route

Hello Experts,

Time on CUCM is correct but its not forward to IP Phone..there is 6 mins difference on IP Phones.

Thanks,

12083
Views
0
Helpful
29
Replies