Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

time to connect a call to the pstn from cucm 8.5

Hello every one.

I wonder if someone has face something like this. I have a customer that does not like the time a call takes to get to the pstn.

We are using call manager 8.5 and h323 gateways (Using E1 cards with r2 signalling). I have adjusted the t.302 timer to 3000 ms. which is the minimum value  and I have also use the time out interdigits to 0 on the gateways voice ports.

We notice that the calls takes about 6 to 7 seconds to get established but the customer wants less time.

Any Ideas?

Regards

1 REPLY
Cisco Employee

Re: time to connect a call to the pstn from cucm 8.5

I would suspect there's some overlapping there, either in CUCM or in H323, or both.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
101
Views
0
Helpful
1
Replies
CreatePlease to create content