Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Time-zone 23 in CME 7.0

Hello,

I install a CME 7.0 change the time-zone in Telephony-service to 23 but still have the time of USA, can you tell me what's the can be the problem plz ?

Regards

17 REPLIES
Hall of Fame Super Gold

Re: Time-zone 23 in CME 7.0

Hase you got the right time in the router ?

Have you reset telephones ?

New Member

Re: Time-zone 23 in CME 7.0

Yes, i get time-zon 23 (West Europe), i see that the time-zone is well configured on 23 with the show telephony-service command.

i reset phones too.

Hall of Fame Super Gold

Re: Time-zone 23 in CME 7.0

You need right time in the router, "show clock". Using an NYP server is the preferred form.

New Member

Re: Time-zone 23 in CME 7.0

with "show clock" i have the correct time in the router, ntp server is configured too.

Re: Time-zone 23 in CME 7.0

Hi,

If correct time is in the router and time-zone under telephony service, then you can try:

telephony-service

create cnf-files

Then reset the phones.

Hope it helps, if it does please rate.

Best regards,

- Adrián.

New Member

Re: Time-zone 23 in CME 7.0

I tried that too but don't resolve the problem.

thanks for your help

New Member

Re: Time-zone 23 in CME 7.0

do you have another idea plz to resolve this problem ?

Hall of Fame Super Gold

Re: Time-zone 23 in CME 7.0

Have you set right type under ephone ?

New Member

Re: Time-zone 23 in CME 7.0

yes it's the right

New Member

Re: Time-zone 23 in CME 7.0

who can confirm me plz the rigth time-zone of France ?

Hall of Fame Super Gold

Re: Time-zone 23 in CME 7.0

23 in telephony-service.

Have you checked router have the right time in first place ?

New Member

Re: Time-zone 23 in CME 7.0

23 that's the value i enter.

yes the router has the right time and ntp server configured too.

Hall of Fame Super Gold

Re: Time-zone 23 in CME 7.0

Which telephone do you have and which firmware ?

New Member

Re: Time-zone 23 in CME 7.0

7942G, 7911G and 7961G

Firmware 8.4.2S

Hall of Fame Super Gold

Re: Time-zone 23 in CME 7.0

Try upgrading to 8.4(4)

New Member

Re: Time-zone 23 in CME 7.0

I reloaded the router and that's work fine now, thanks for your assistance

New Member

Time-zone 23 in CME 7.0

Hi to all,

I have read all your helpful notes. I need your help on the this problem.

The CME has the below configuration:

///

clock timezone EET 2

clock summer-time EEST recurring last Sun Mar 3:00 last Sun Oct 4:00

network-clock-participate wic 0

network-clock-participate wic 1

network-clock-participate wic 2

///

///

telephony-service

time-zone 29

time-format 24

date-format dd-mm-yy

///

All the IP-Phones 6941 has the correct time but unfortunately all the 79xx IP-Phones have wrong time (missing one hour).

Could you please help me on this?

tnx a lot

Isidoros

700
Views
0
Helpful
17
Replies