Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

timeout when searching for user in directory for ad hoc conference

Hi,

My customers problem;

While in a call, he presses the conference button and as expected the other party is placed on hold.

He then searches his personal directory for the new participant, but the timeout seems to kick in and he gets an automated message to say that it is not possible.

He's using cucm7.0 and I can see a hardware conf bridge registered.

I can't replicate the fault on our own cucm 7.1

Sent from Cisco Technical Support iPad App

3 REPLIES
Hall of Fame Super Red

timeout when searching for user in directory for ad hoc conferen

Hi there,

I can duplicate this behavior on our CUCM cluster (7.1(3b)su2). and it seems

that the IDT kicks in if you can't locate the user quickly enough It could be that

the customer has the T302 timers set @ a lower number than your cluster.

The IDT is seen in CUCM as the T302 timer

Try this info;

Configuring the Interdigit Timeout

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

New Member

Re: timeout when searching for user in directory for ad hoc conf

Thanks Rob,

I presume adjusting the IDT will affect normal calls as well? Meaning if I set it for longer, then dialling will be delayed for normal calls.

I figured a work around....

1. Place first participant on hold

2. Search the directory and dial the second participant

3. Place him on hold as well

4. Hit the select soft key and select both calls

5. Hit the join soft key and hey presto!

Cheers

Dan

Sent from Cisco Technical Support iPad App

Hall of Fame Super Red

timeout when searching for user in directory for ad hoc conferen

Hey Dan,,

Nice workaround my friend +5 for sharing this knowledge which

may help someone else down the road.

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

211
Views
9
Helpful
3
Replies
CreatePlease to create content