To create Trunk Group with differnt T1 PRI's groups for our outbound calls
I would like to request all of you that I have requiremnt that we have to create "Trunk Group" of diffenent T1 controller PRI's for outbonds call, mean I need to create a trunk group with differnt T1 PRI's groups for our outbond calls, but my problem is that I don't know and no idea that how I will do this , i am also try to find some cisco doc for this still I did not find these info, so I request all of you that I will be thank full to all of you if you can help me out for my this problems.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...