haha... sorry had to laugh.... every implentation is different. If you are migrating from a legacy PBX or a green field installation, it's all different. If you wanted the time to install a server from scratch, then you could estimate that. But if you migrating.. who knows... you need to have a couple under your belt to understand how it works, and how long it could take. but they are rough numbers....
Unboxing and installing an IP phone - 10 minutes
Unboxing, racking, install server - 2 hours
day 2 support
There are a lot of steps involved.
Do you have any numbers or legacy pbx and vm you could give us?
You basically need to do a gap analyis. Where you are today, where you want to be tomorrow and here is how you will get there.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...