Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Tracking PRI Usage via SNMP on a 3925 Voice Gateway

Hi all,

I've got a 3925 router with 5 PRI's I am trying to set up MRTG to track the PRI usage for trending report. I believe I've the correct SNMP OID and I am able pull the correct data I am looking for from SNMP walk but for some reason the data return is only on the PRI's in slot0. I do not see any data return for the PRI's in slot1 and slot2.

The 3925 is running IOS 15.4.2T and I am using this OID cpmDS1ActiveDS0s. Has anyone run into this issue ?

Thanks in advance !!

Danny

 

2 REPLIES
New Member

This report is built from

This report is built from CUCM CDR but can show you your individual AND/OR combined PRI utilization going thru your GW (can do SIP trunks too). This Utilization reporting can be On-Demand or emailed to you on a scheduled basis:

New Member

Hello, this is a great

Hello, this is a great question. 

Is there anyway I can do this via SNMP through an OID?

Thanks!
Cheryl

239
Views
0
Helpful
2
Replies
CreatePlease login to create content