Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Transcoder issue

Hi all..

I am confering Transcoder on a 2811. But i am having problem with the conference profile. Its not taking any maximum session and only shows 0 as the option

for max session. As it is not accepting any maximum session , so it is shutdown and i am unable to noshut it.

Here is my related configuration.

2811#sh inventory

NAME: "2811 chassis", DESCR: "2811 chassis, Hw Serial#: FTX1142A04J, Hw Revision: 52.57"

PID: CISCO2811 , VID: V05 , SN: FTX1142A04J

NAME: "PVDMII DSP SIMM with one DSP", DESCR: "PVDMII DSP SIMM with one DSP"

PID: PVDM2-16 , VID: V01 , SN: FOC11373FTN

2811#sh running-config

***output supressed***

voice-card 0

dspfarm

dsp services dspfarm

sccp local FastEthernet0/0

sccp ccm 172.28.80.11 identifier 2 version 4.1

sccp ccm 172.28.80.10 identifier 1 version 4.1

sccp

!

sccp ccm group 10

associate ccm 2 priority 2

associate ccm 1 priority 1

associate profile 20 register CFBBZV-03

associate profile 30 register MTPBZV-03

associate profile 10 register TRSBZV-03

switchover method immediate

switchback method immediate

!

dspfarm profile 10 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec gsmfr

codec g729r8

maximum sessions 3

associate application SCCP

!

dspfarm profile 20 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

shutdown

Can anyone further tell me how much each session of PVDM2-16 supports ?

3 REPLIES
Silver

Re: Transcoder issue

Hello

How many PVDM2-16 do you have? On the sh run I can see that you have a transcoder with Maximum sessions set to 3. If you only have that PVDM avaialble the problem is that DSP resources cannot be shared with conferencing; you can have transcoding and voice channels shared on one DSP, but you cannot share those with conferencing and a PVDM2-16 only has 1 DSP with 16 Channels.

If possible, could you please upload a sh diag?

Thanks!

Community Member

Re: Transcoder issue

2811#sh diag

Slot 0:

C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports

Port adapter is analyzed

Port adapter insertion time unknown

Onboard VPN : v2.2.0

EEPROM contents at hardware discovery:

PCB Serial Number : FOC11385XTU

Hardware Revision : 1.0

Top Assy. Part Number : 800-26920-04

Board Revision : A0

Deviation Number : 0

Fab Version : 04

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 87

Hardware date code : 20070926

Chassis Serial Number : FTX1142A04J

Chassis MAC Address : 001d.a107.c910

MAC Address block size : 24

CLEI Code : COM7R00ARA

Product (FRU) Number : CISCO2811

Part Number : 73-10258-05

Version Identifier : V05

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF C1 8B 46 4F 43 31 31 33 38 35 58 54 55 40

0x10: 03 E7 41 01 00 C0 46 03 20 00 69 28 04 42 41 30

0x20: 88 00 00 00 00 02 04 03 00 81 00 00 00 00 04 00

0x30: 09 87 83 01 32 42 0E C2 8B 46 54 58 31 31 34 32

0x40: 41 30 34 4A C3 06 00 1D A1 07 C9 10 43 00 18 C6

0x50: 8A 43 4F 4D 37 52 30 30 41 52 41 CB 8F 43 49 53

0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 28 12

0x70: 05 89 56 30 35 20 D9 02 40 C1 FF FF FF FF FF FF

PVDM Slot 0:

16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Hardware Revision : 4.0

Part Number : 73-8538-05

Board Revision : B0

Deviation Number : 0

Fab Version : 04

PCB Serial Number : FOC11373FTN

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM2-16

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 EF 41 04 00 82 49 21 5A 05 42 42 30

0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 31 33 37

0x20: 33 46 54 4E 03 00 81 00 00 00 00 04 00 09 00 CB

0x30: 88 50 56 44 4D 32 2D 31 36 89 56 30 31 20 D9 02

0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Silver

Re: Transcoder issue

Hello Munawar,

This is what you have:

Slot 0: C2811 Mainboard

Slot 0: PVDM2-16

As mentioned before DSP resources cannot be shared between conferencing and transcoding; and since you have a PVDM2-16 (1 DSP) configured with a transcoding profile, you won't be able to setup conferencing. You will need yo obtain another PVDM2 for this to work.

Check this link:

http://www.cisco.com/en/US/partner/prod/collateral/modules/ps3115/ps6024/prod_qas0900aecd8016c6ad_ps5855_Products_Q_and_A_Item.html

194
Views
3
Helpful
3
Replies
CreatePlease to create content