Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Transcoder not work.

Transcoder is regiestered to CUCM 6.1 successfully. When I make a call from G.711 to G.729, the call fail. From the log I can see CUCM allocate the transcoder but then release it without any errors.

Any help would be appreciated.

Everyone's tags (1)
1 REPLY
Green

Re: Transcoder not work.

Make sure of these things:

1. Profile in trasncoder is configure with proper G729 version (G729, g729a, g729b, g729ab)

2. Make sure Region between G711 and XCODER is configured for G711 and region between G729 zone and XCODER is G729

Region between G711 and G729 should be G729 for xcoder to kick in.

Example

IP Phone (g729) --- IVR (g711)

REGIONA              REGIONB

TRANSCODER REGION C

Codec bw REGION A and B is G729

Codec bw REGION A and C is G729

Codec bw REGION B and C is G711

3. Device have access to XCODER via MRGL or NULL MRGL

433
Views
0
Helpful
1
Replies