Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Transcoders

Hi All,

I have a doubt in regards if I have 2 gateways and 1 CUCM clusters, is possible associate both Transcoders Gateways resources to the CUCM cluster in a group, I need to know becuase if any of the GWs failured.

Regards

Andres

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Transcoders

Andres,

Yes, you can have more than one transcoder associated with a given CUCM cluster. These can be added to Media Resourc Groups and the MRGs added to Media Resource Group Lists. The MRGLs are then assigned to device pools or devices. Resources within an MRG are load shared. Resources in diffeerent MRGs inside a single MRGL are used for redundancy.

Hope this helps. If so, please rate the post.

Brandon

2 REPLIES
Cisco Employee

Re: Transcoders

yes, configure them both on the same MRG to achieve that

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Transcoders

Andres,

Yes, you can have more than one transcoder associated with a given CUCM cluster. These can be added to Media Resourc Groups and the MRGs added to Media Resource Group Lists. The MRGLs are then assigned to device pools or devices. Resources within an MRG are load shared. Resources in diffeerent MRGs inside a single MRGL are used for redundancy.

Hope this helps. If so, please rate the post.

Brandon

280
Views
0
Helpful
2
Replies
CreatePlease to create content