Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Transcodes

On cisco.com it is mentioned..

“Each DSP is individually configurable to support either conferencing or transcoding and standard voice Termination”

On a single DSP I can support either only transcoder or Conference or MTP ?? Am I right in my understanding.

On a 2821 I have

NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"

PID: PVDM2-64 , VID: V01 , SN: FOC112447TS

And on a 2811 I have

NAME: "PVDMII DSP SIMM with one DSP", DESCR: "PVDMII DSP SIMM with one DSP"

PID: PVDM2-16 , VID: V01 , SN: FOC11373FT.

Can anybody tell me the number of transcoding, conference and MTP sessions supported on each of two modules.

Moreover any helpful material regarding further understanding of Transcoders etc etc can be very assistive..

thanks

1 REPLY
Cisco Employee

Re: Transcodes

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html

Enhanced Transcoding and Conferencing for IOS Voice Gateways in a CallMananger Network using DSP Resources Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008084fe1f.shtml

1st link contains several tables on number of sessions and lots of information on the subject

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
173
Views
0
Helpful
1
Replies
CreatePlease to create content