Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED

Hi,

We got an alert on the RTMT for media device   --

Syslog UC_RTMT-2-RTMT_ALERT: %[Name=NumberOfRegisteredMediaDevicesDecreased .

While checking the RTMT  and logging on the specific gateway and putting the show sccp command -- got these message for all the MTP resources status.

=================

MTP Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED  ==== Ideally in a normal scenario // cause code is : NONE .

=================

Needed to understand what exactly do i need to check to confirm and isolate this alert on the CCM and gateway. Appreciate a quick help on this -- as this is an active alert.

Thanks.

CCM Version : 8.6  -- please also guide on the criticality of this alert .

Whatever level you reach getting better never stops -- Sachin Tendulkar       

Whatever level you reach getting better never stops -- Sachin Tendulkar
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REG

Hi Abhishek,

U can also run the command show voice dsp group all to check the STATE of dsp 1 ,2 in respective slots whether they show UP or FAIL.

regds,

aman

3 REPLIES
Cisco Employee

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REG

Have you checked that the MTP resources are registered in CUCM??

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
VIP Purple

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REG

Hi Abhishek,

U can also run the command show voice dsp group all to check the STATE of dsp 1 ,2 in respective slots whether they show UP or FAIL.

regds,

aman

VIP Purple

Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REG

Abhishek,thanks for rating.

regds,

aman

1550
Views
0
Helpful
3
Replies
CreatePlease to create content