Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Transfer Calls from dect on FXS port (STCAPP)

Dear All,

I have a Dect phone that is connected to an FXS card in a Cisco Voicegateway 2900 series, i have configured it under stcapp.

Now the phone does work but it can't transfer to other internal phones. My question is how do i configure this, i have looked into stcapp supplementary services.

Voiceport

!

voice-port 0/3/1

cptone BE

timeouts interdigit 5

description === DECT 15360 ===

caller-id enable

!

Dial-peer

!

dial-peer voice 700 pots

service stcapp

port 0/3/0

!

dial-peer voice 701 pots

service stcapp

port 0/3/1

!

stcapp supplementary-services

port 0/2/1

  fallback-dn 98307

port 0/3/0

  fallback-dn 15360

port 0/3/1

  fallback-dn 15360

1 REPLY
VIP Super Bronze

Transfer Calls from dect on FXS port (STCAPP)

This is how to do transfer for a sccp controlled endpoint..

"During an active call, user presses hookflash and receives dial tone. User dials number for transfer and either stays online to announce (consultive transfer) or hangs up (blind transfer). When user hangs up, the call is transferred"

Please refer to the sccp supplemetary services feature guide

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
237
Views
0
Helpful
1
Replies
CreatePlease login to create content