i have currently an MCS-7825 running ccm 4.0. we are in the process of an upgrade with a MCS-7835-H2. i need to put the CCM 4.0 onto this new server. i have the CCM 4.0 software however, it wouldnt detect the new server. what do i need to download for a smooth install of this?
the customer currently has OS version 2000.2.6 CCM 4.0(2)
they currently only have one server therefore i didnt want to interfer at all with this in case of anything. they ordered 6.1.2 so what i planned to do was make a backup, reinstall 4.0 on the new server, restore to this new server, then upgrade to 4.1 and then to 6.1......hehe, after thinking about it, i decided to pull all the necessary info and recreate (its not a big install). id still like to know though as there is another customer that is currently pursusing this option with the same setup but on a larger scale.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...