cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
641
Views
0
Helpful
4
Replies

Transfer/Conference/MoH Issue Centralized CUCM

Hi,

I have problems with transfer, conference and music on Hold in the deployment of this centralized CUCM. The transfer, conference and MoH

functions works fine locally, but didn't work between regions. For example, when I pressed the button to transfer the call between two devices in different regions  the softkey change to gray and after few seconds the call is finished. I've configured CFB HW and XCODE in IOS Gateway but the problem still continues.

I hope someone can help me to solve this issue.

Regards

4 Replies 4

D_Lebedev
Level 3
Level 3

Hi,Is your CFB Registered on CM?

Have you created MTP and transcode profile?

Faced with same problem with first installation.

That time i wasn't able manual for it,only 3 party forums.

As a rule,you should have these settings created on yor MGCP Gaeway:

But you have to create it through CM Web interface.

sccp ccm group 1

bind interface GigabitEthernet0/0

associate ccm 1 priority 1

associate ccm 2 priority 2

associate profile 2 register tr_CC_GW_1

associate profile 3 register CFB_CC_GW_1

associate profile 4 register MTP_CC_GW_1

!

dspfarm profile 2 transcode 

codec g711ulaw

codec g729abr8

codec g729ar8

maximum sessions 16

associate application SCCP

!

dspfarm profile 3 conference 

codec g711ulaw

codec g729br8

codec g729ar8

codec g729r8

maximum sessions 4

associate application SCCP

!

dspfarm profile 4 mtp 

codec g711ulaw

maximum sessions software 10

associate application SCCP

Hi D_Lebedev,

Previously, I've created the HW resources in IOS and CM Web interface. My configurations is the following:

sccp local GigabitEthernet0/1

sccp ccm 130.61.1.3 identifier 1 priority 1 version 7.0

sccp ccm 130.61.1.4 identifier 2 priority 2 version 7.0

sccp

!

sccp ccm group 1

bind interface GigabitEthernet0/1

associate ccm 1 priority 1

associate ccm 2 priority 2

associate profile 888 register XCODELOCAL

associate profile 777 register MTPG729CAA3

associate profile 666 register MTPG729CAA2

associate profile 555 register MTPG729CAA1

associate profile 444 register MTPG711CAA

associate profile 333 register MTPG729CAA

associate profile 111 register XcodeAltex

associate profile 222 register ConfAltex

!        

dspfarm profile 111 transcode 

description "DSP Resources Transcoding"

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 12

associate application SCCP

!

dspfarm profile 888 transcode 

description "DSP Resources Transcoding"

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 3

associate application SCCP

!

dspfarm profile 222 conference 

description "DSP Resources Conferencias"

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 10

associate application SCCP

!

dspfarm profile 333 mtp 

codec g729ar8

maximum sessions software 20

associate application SCCP

!

dspfarm profile 444 mtp 

codec g711alaw

maximum sessions software 20

associate application SCCP

!

dspfarm profile 555 mtp 

codec g729r8

maximum sessions software 20

associate application SCCP

!

dspfarm profile 666 mtp 

codec g729br8

maximum sessions software 20

associate application SCCP

!

dspfarm profile 777 mtp 

codec g729abr8

maximum sessions software 50

associate application SCCP

I

I don't have Multicast MoH, just MoH with G711ulaw and G729.

And the CFB is also registered, both SW and HW.

I missing something else?

Hi,

Please place here output with command "sh media resource status"

And go to your Phone by www IP and show logs.

Last log file from Console Logs--/FS/cache/log10

Also,see attach.

Check you have same status-REGISTERED-

10.30.1.30-GW address.

Check with your settings,it should be GW IP,not CM IP only.

I get the following information from the show command:

show media resource status

Resource Providers:

Resource  Provider ID :: FLEX_DSPRM Status :: REGISTERED

Service Profiles

MTP :: 333 444 555 666 777

TRANSCODING :: 111

CONFERENCING :: 222

Applications :

Application ID : SCCP, Status : REGISTERED

And Transcoder and CFB resources are registered.

Let me get the log, and i'll update in brief.

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: