Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Transfer sofkey -> That key is not active here CCM 6.1

When I want to make my call transfer, when I push the transfer button it says that key is not active here... what can be the problem... some of the phones have this problem most of them are working normal and they can make transfers. thanks

  • IP Telephony
3 REPLIES
Silver

Re: Transfer sofkey -> That key is not active here CCM 6.1

Hi,

Are these phones configured with 2 lines? If so, this has already been discussed on a previous post:

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddd0192

If not, are these phones using the same softkey templates (have you also factory reset them)?..

Please rate useful posts..

New Member

Re: Transfer sofkey -> That key is not active here CCM 6.1

The problem which you talk is about Call Forwarding. My problem is about Call Transfer...

Silver

Re: Transfer sofkey -> That key is not active here CCM 6.1

Sorry, misunderstood your post!

Are there any discrepancies between the phones that are working and the ones that are not (physical locations, phone loads, softkey templates, DHCP scopes)?

1019
Views
0
Helpful
3
Replies
This widget could not be displayed.