cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
678
Views
0
Helpful
3
Replies

Transfering Cisco Licenses from CCM3.2 to CUCM7.1??

ricardo1831
Level 1
Level 1

We have recently upgraded from CCM 3.2 to CUCM 7.1 and obtained a number of DLU's for the new system. Can anyone tell me if the licenses from the old CallManager can be used on the new one?? And if so how to go about it??

We have just run out of DLU's on the new system and would like to utilise what we used to have, although I understand the licensing didn't work in the same way as it does now.

Your feedback would be appreciated.

Ric

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

Still fairly easy to get those licenses migrated.

Reach our licensing team at licensing@cisco.com and explain them the situation and that you want to migrate those phones but there is no DMA so you want to do it manually.

You'll need the MAC from the 7.1 licensing server.

You'll get a spreadsheet you need to fill with the phones you have and this way they can generate the DLUs.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

Still fairly easy to get those licenses migrated.

Reach our licensing team at licensing@cisco.com and explain them the situation and that you want to migrate those phones but there is no DMA so you want to do it manually.

You'll need the MAC from the 7.1 licensing server.

You'll get a spreadsheet you need to fill with the phones you have and this way they can generate the DLUs.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

What is the upgrade path you followed to upgrade from 3.2 to 7.1 ???

Regards

We upgraded the hardware, as 7.1 runs on a Linux server, to MCS7835 and used the upgrade tool to export all the phones and devices from 3.2 to 7.1. The previous setup was single server so we are currently using CUCM Business Edition. This was a relatively easy migration as it was a like-for-like swap.

Hope this helps.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: