Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Transferring a call when Alerting

in CME

When telephone is Alerting

Only Acct CallBack Endcall buttons available

But I want Transfer also

softkeys alerting Acct CallBack Endcall

doesnt accept any other option

Is there any solution?

2 REPLIES
Hall of Fame Super Gold

Re: Transferring a call when Alerting

It appears that you want the ability for someone to place a call on behalf of someone else, and transfer to him/her while ringing remotely.

If so, I think the procedure is first call or be called by "someone else", then initiate a blind transfer to the third party.

I agree that even transferring a new call while alerting would be useful for example when an operator is making attempts to reach a busy destination on behalf of someone else, and transfer before answered.

Hope this helps, please rate post if it does!

Highlighted
New Member

Re: Transferring a call when Alerting

My case is different;

I want from the opearator to connect me to a outside customers mobile telephone, than hangs down.

Operator calls mobile telephone by using FCT (GSM-TO-GSM). FCT doesn'nt return CONNECTED SIGNAL.

Operator Telephone shows "RING OUT" even in connected case. So Trnsfer button never appears.

I try all signalling options. Nothing changes.

THANKS

117
Views
0
Helpful
2
Replies
CreatePlease login to create content