I'm working on the whole transformation pattern to prefix missed calls thing. I have found some rather ancient instructions, which seem to be the only ones out there, and I've hit a snag. I'm working with CUCM 8.6.2. And when I get to the part where I configure the Transformation patterns there is no longer any way to set a CSS. How am I supposed to get this to work if i cannot set a CSS there? Was it moved? Is there any new documentation that covers this change?
Create the calling party transformation pattern as per your requirement and put it in a partition. Now put that into a new css say "Css-transform". You can add this CSS either on the phone page or the device pool if you want this for the whole device pool. Field is "Calling Party Transformation CSS" be sure to uncheck the option "Use device pool transformation css" if doing it only for one device .
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...