I tried to use them but I couldn't figure out how they work. All I found is a description on the admin guide:
"The parameters in the Transformation Patterns window are used to provide appropriate caller information using the Calling Party Transformation calling search space on the destination device. Calls through transformation patterns are not routable. When this pattern is matched, the call does not route to any device."
My CCO account cannot access this link, can you maybe sent one available for customers?
Our setup is SIP trunk between UCM 7.0(1) and Microsoft Mediation Server 2007. OCS clients are configured with RDP on UCM side. PSTN calls initiated from OCS client come with caller ID of IP Phone this RDP is associated with. I believe Calling Party Transformation CSS under RDP setup is exactly what will take care of it, but I cannot make it work and the CLID on PSTN phone still shows just 4 digits internal extension....
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...