Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Translating UNKNOWN on H323 FXO

I have an h323 FXO gateway, plar'ing inbound calls to a couple of IP phones ... looking to translate UNKNOWN calling party number to a specific trunk id "911-1", "911-2" per 3rd party app company's request. Possible?

TIA,

Brian

Everyone's tags (3)
3 REPLIES
Super Bronze

Translating UNKNOWN on H323 FXO

Hi Brian

Take a look here :

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_voice_configuration_library_glossary/vclclid.html#wp1077886

Looks like station-id should fill in the blank where no CLI is presented to the FXO.

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Translating UNKNOWN on H323 FXO

Thanks for the reply. I had tried that however it still displayed "UNKNOWN" at the station. I plan to try 'station-id number' or perhaps a translation rule. I'll post an update once I get it sorted out.

Any other ideas greatly appreciated.

Brian

Sent from Cisco Technical Support iPad App

New Member

Re: Translating UNKNOWN on H323 FXO

Station-id number solved the problem. In what appears to be a config dependency, station-id number is required for the station-id name to display at all.

346
Views
0
Helpful
3
Replies
CreatePlease to create content