Translation pattern for converting a DID number to a local number
DID number = 89236759
site + ext no = 370 759
We are using prefix 9 for outside calls. If someone dials 9 89236759, we still want it to go thru PSTN. But if someone dials 89236759 (without outside call prefix 9), is there a way for CCM to recognize this as internal call and convert it automatically as 370 759?
Re: Translation pattern for converting a DID number to a local n
Hi, thanks for your prompt reply. pls refer to below numbering structure with sample info:
DID number = 89236759 (8 digits)
site code = 370 (3 digits)
ext number = 759 (3 digits)
The last 3 digits may change depending on the extension number called. Instead of translation pattern, can i just use a route pattern? or should i create both a translation pattern and a route pattern for this to work?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...