Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Translation Pattern MGCP E1 CCM5.1.2

Hello, guys

I have a MGCP gateway and CCM5.1.2. A CSS,named CSS-A,contains a partition which has all the 4-digit extensions(include phones and a CTI route point).on the mgcp gw config,I set the signification digit to 4, use CSS-A.In this case, everything is fine.

But when I use a translation-pattern from 8 digits to 4 digits to search CSS-A,phones can be connected while the CTI route point can not.We can see the message from the debug states: User busy.

It looks weird. How come?

  • IP Telephony
1 REPLY
Bronze

Re: Translation Pattern MGCP E1 CCM5.1.2

This would seem that the use of the translation pattern's calling search is somehow bypassed after digit transformation.Try modifing the calling search space of the gateway to include the partition with the OnNet DNs.

112
Views
0
Helpful
1
Replies