I'm having an issue creating a translation pattern and assigning it to an extension if that extension is part of a partition. When I dial the entire phone number from my extension, I get a phone not in service error. Here's the example:
Local extension - 3333
Device CSS- TeachersCSS
Line 1 Parition - TeachersPT
Line 1 Directory Number Settings CSS - TeachersCSS
Partition - InboundPatternsPT
CSS - InboundPatternsCSS
The idea of the pattern is to provide a DID for that extension. If no partitions are assigned to the phone and the pattern, the DID works properly.
OK, so what you want is to map 4 digits that are coming from the PSTN to an IP phone that does not have that 4 digits as internal extesion?
if so what you need to do is configure the inbound CSS for the GW to reach the TP , under the TP configure the called number as the IP phone you want to reach and make sure the CSS of the TP is able to reach the destination IP phone
Thanks for the help. Unfortunately, I already have those pieces configured and I'm still running into a brick wall. I've just opened a TAC request, so we'll see where that goes. If I get it sorted out, I'll report back.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.