Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Translation Rule - #01 to 18005551212

I am having an issue with trying to get the following translation rule to work. Can anyone help? In the debugs it apears that it will only collect the #0 and then do a fast busy.

Here is my config:

translation-rule 10

Rule 1 #01 18005551212

dial-peer voice 20 pots

translate-outgoing called 10

port 0/0/0


Re: Translation Rule - #01 to 18005551212

Your destination pattern on the pots dial-peer needs to match 18005551212 or similar (using wild cards).

New Member

Re: Translation Rule - #01 to 18005551212

OK. I see what your saying. The issue is now that I used '9' as a PSTN breakout. Is there anyway to match on the '#' and the translate afterwards?

Hall of Fame Super Silver

Re: Translation Rule - #01 to 18005551212

Try the following instead:

voice translation-rule 1

rule 1 /#01/ /18005551212/

voice translation-profile 1

translate called 1

dial-peer voice 20 pots

translation-profile outgoing 1

Router#test voice translation-rule 1 #01

Matched with rule 1

Original number: #01 Translated number: 18005551212

Original number type: none Translated number type: none

Original number plan: none Translated number plan: none



New Member

Re: Translation Rule - #01 to 18005551212

Tried that. Doesn't work. It doesn't match on any dial-peers. Thanks though.

New Member

Re: Translation Rule - #01 to 18005551212

You should upload your config.

You were trying to use translation rules where as you need to be using voice translation-rules and voice translation-profiles as per the previous reply.