Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

translation-rule for incoming number

I need a translation for an h.323 gateway that will strip the first 5 digits from calls originating from 31238..... and 84795.....

I tried

translation-rule 1

rule 0 ^847950.... 0

rule 1 ^847951.... 1

.

.

.

.

rule 9 ^847959..... 9

but that leaves me no room for the 31238..... sequence since the translation-rule will only accept 10 rules.

All help is appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: translation-rule for incoming number

Hi,

please use voice traslation-profile and rule that is the current way. You just need two rules:

voice translation-profile makedid

translate calling 100

voice translation-rule 100

rule 1 /^84759/ //

rule 2 /^31283/ //

Or even a single one if these eg:

rule 1 /^[38]..../ //

Hope this helps, please rate post if it does!

2 REPLIES
Hall of Fame Super Gold

Re: translation-rule for incoming number

Hi,

please use voice traslation-profile and rule that is the current way. You just need two rules:

voice translation-profile makedid

translate calling 100

voice translation-rule 100

rule 1 /^84759/ //

rule 2 /^31283/ //

Or even a single one if these eg:

rule 1 /^[38]..../ //

Hope this helps, please rate post if it does!

Community Member

Re: translation-rule for incoming number

That worked... here is exactly what I put in:

voice translation-rule 100

rule 1 /^84795/ // type national unknown

rule 2 /^31238/ // type national unknown

!

!

voice translation-profile makedid

translate calling 100

!

I had to change the calling type since my CallManager is set to insert a 91 on National call types.

Thanks for you help. Very much appreciated.

cheers,

mgl

118
Views
0
Helpful
2
Replies
CreatePlease to create content