Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Translation Rules with 2 ISDN lines

Hi, in my offices i have two ISDN telephone lines.

My router is 2811 firmware version 12.4.20.T1 and 2 7970G phones.

When someone calls Line 1, then phone with extension 1000 rings. (port 0/3/0)

When someone calls Line 2, then phone with extension 1001 rings. (port 0/3/1)

Problem is, when the phone with extension 1001 tries to make a call, then the call goes out via Line 1 and not Line 2 as i want to. Also, when it calls back a missed call, it goes out again via Line 1.

If phone 1001 (line 2) dials 9 in front of the number, then the call goes out from line 2 as it should go. How can i automate this process? I mean, if the phone user dials 21012345 then how the router can add automatically the 9 in front of the number and then send out 21012345 to the telco?

Also when phone 1001 (line 2) dials a number from the directory or from missed calls, how it can automatically add number 9 in front?

When phone 1001 (line 2) answers a call, when he press the "Transfer" button and then selects number 1000 (the other phone in the office) i don't want it to add a 9 so it must dial 1000 not 91000, how's that possible?

What translation rules/configs i must do in order to work properly?

Here's a part of my config file:

!

voice translation-rule 1

rule 1 // /9/

!

!

voice translation-profile 1

translate calling 1

!

voice translation-profile 2

translate called 1

!

interface BRI0/3/0

no ip address

isdn switch-type basic-net3

isdn tei-negotiation first-call

isdn point-to-point-setup

isdn incoming-voice voice

!

interface BRI0/3/1

no ip address

isdn switch-type basic-net3

isdn point-to-point-setup

isdn incoming-voice voice

!

voice-port 0/1/0

compand-type a-law

cptone GR

connection plar opx 1000

impedance complex2

caller-id enable

!

voice-port 0/1/1

cptone GR

connection plar opx 1000

impedance complex2

caller-id enable

!

voice-port 0/2/0

cptone GR

!

voice-port 0/2/1

!

voice-port 0/3/0

compand-type a-law

connection plar 1000

!

voice-port 0/3/1

compand-type a-law

connection plar 1001

!

!

!

!

!

dial-peer voice 1 pots

destination-pattern 1001

incoming called-number .

no digit-strip

port 0/3/1

forward-digits all

!

dial-peer voice 2 pots

destination-pattern 1000

incoming called-number .

no digit-strip

port 0/3/0

forward-digits all

!

dial-peer voice 3 pots

description 499

destination-pattern 9T

port 0/3/1

!

dial-peer voice 4 pots

description 412

destination-pattern .T

port 0/3/0

!

Any help is much appreciated!! Thanks

1 REPLY
New Member

Re: Translation Rules with 2 ISDN lines

Never mind, i've fixed it. Here's what i did:

!

voice translation-rule 1

rule 1 // /9/

!

voice translation-profile prefix

translate called 1

!

ephone-dn 6

number 2001

label Test

description Test

name Test

translation-profile incoming prefix

That fixed all.

131
Views
0
Helpful
1
Replies