Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Trouble Calling Italy from the UK

I have an issue calling to Italy from the UK.  I have a router with PRI and can place calls to the US and other countries.  When i call Italy, i get a message that states: "the # u have dialed is not recognised"

When I call the same number from a PRI in the US, the call goes through just fine.  I have pasted the debugs for the bad call and the good one.  Any help would be appreciated.

GOOD CALL PLACED FROM US PRI TO ITALY

*Sep 10 12:24:52.169: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0868

Sending Complete

Bearer Capability i = 0x8090A2

Standard = CCITT

Transer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98396

Exclusive, Channel 22

Facility i = 0x9FAA06800100820100A117020100020100800F4D616C636F6C6D2054797272656C6C

Calling Party Number i = 0x0081, '1753603034'

Plan:Unknown, Type:Unknown

Called Party Number i = 0xA1, '9011390773615209'

Plan:ISDN, Type:National

*Sep 10 12:24:52.217: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8868

Channel ID i = 0xA98396

Exclusive, Channel 22

*Sep 10 12:24:54.389: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref = 0x8868

Progress Ind i = 0x8088 - In-band info or appropriate now available

*Sep 10 12:24:54.933: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x0868

Cause i = 0x8090 - Normal call clearing

*Sep 10 12:24:54.961: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x8868

*Sep 10 12:24:54.977: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x0868

CALL FAILS PLACED FROM UK-LANGLEY PRI TO ITALY

-

get message "the # u have dialed is not recognised"

Sep 10 17:06:37 CEST: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x005D

Sending Complete

Bearer Capability i = 0x9090A3

Standard = CCITT

Transfer Capability = 3.1kHz Audio

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA9838E

Exclusive, Channel 14

Calling Party Number i = 0x0081, '1753603034'

Plan:Unknown, Type:Unknown

Called Party Number i = 0xA1, '00390773615209'

Plan:ISDN, Type:National

Sep 10 17:06:38 CEST: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x805D

Channel ID i = 0xA9838E

Exclusive, Channel 14

Sep 10 17:06:38 CEST: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x805D

Progress Ind i = 0x8482 - Destination address is non-ISDN

-------

GBLAVG01(config-if)#do sh voice call summary | inc 0/0/0

0/0/0:15.1 - - -

0/0/0:15.2 - - -

0/0/0:15.3 - - -

0/0/0:15.4 - - -

0/0/0:15.5 - - -

0/0/0:15.6 - - -

0/0/0:15.7 - - -

0/0/0:15.8 - - -

0/0/0:15.9 - - -

0/0/0:15.10 - - -

0/0/0:15.11 - - -

0/0/0:15.12 - - -

0/0/0:15.13 - - -

0/0/0:15.14 - - -

0/0/0:15.15 g729br8 n S_CONNECT

Everyone's tags (5)
402
Views
0
Helpful
0
Replies