Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Trunk 7936

Is there any reason why you would want to trunk a 7936? If on the switch side, you are using the access vlan and voice vlan. Does trunking cause any issues?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Trunk 7936

Hi Sar,

Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Gold

Re: Trunk 7936

Hello,

I do not see any reason to trunk a 7936, or any other model. As you indicated, the access+voice vlan is the proper way to configure the switch port.

Hope this helps, please rate post if it does!

Hall of Fame Super Red

Re: Trunk 7936

Hi Sar,

Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(

Hope this helps!

Rob

New Member

Re: Trunk 7936

Thanks for your help!

131
Views
0
Helpful
3
Replies