Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Trunk-Group with FXO

I have 6 FXO ports on a 2821 gateway and I had one of my POTS lines go down. The problem is it was the first one on my trunk groups priority list. It seems that when the line is dead it does not search to the next port in the trunk-group. Is there something I need to put in my config to go to the next FXO port? Also this gateway is a h323 device on a Call Manager. Here is snippet of my config

trunk group westel

max-calls voice 2

voice-port 0/0/0

trunk-group westel 2

caller-id enable

!

voice-port 0/0/1

trunk-group westel 1

caller-id enable

!

dial-peer voice 100 pots

trunkgroup westel 1

destination-pattern 9T

direct-inward-dial

Thanks

Ken

374
Views
0
Helpful
0
Replies
CreatePlease login to create content