Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Trunk SIP between CCME4.0 and Linksys SPA9000

Is it possible to make a sip trunk between an Cisco Call Manager Express 4.0 and a Linksys SPA9000?

The IOS used is 12.4(11)T2.

If possible, how to do?

is there any link about best practices.

Best regards

Antra

1 REPLY

Re: Trunk SIP between CCME4.0 and Linksys SPA9000

Try this:

voice service voip

allow-connections h323 to sip

allow-connections sip to h323

!

!

!

sip-ua

disable-early-media 180

retry invite 3

no suspend-resume

!

dial-peer voice 10 voip

description TO_SPA9000

destination-pattern

voice-class codec 1

session protocol sipv2

session target ipv4:

session transport udp

dtmf-relay rtp-nte

no vad

111
Views
0
Helpful
1
Replies
CreatePlease to create content