I am looking at attaching Cisco IP Phones to a Cat6509E on WS-X6148A-GE-45AF line cards. The IP Phones will not share a port with a PC/Device but all devices connected to line card access ports will be in the same Vlan.
I have QoS enabled and have customized some queuing paramters.
I am ready to apply trust boundaries and can only find config docs for implementations where a PC/Device is connected to the Cisco Ip Phone and trunked over separate vlan(s) into the switch. I will not be using that model.
I only want to trust dscp/cos on Cisco Ip Phones.. nothing else.
Has any Netpro had experience in setting up QoS trust boundaries in this scenario?
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...