Use the time period and time schedule of the callmanager. You can find this in CallRouting>Class of Control. Here you establish days and hours and after that you can force partitions to use those time schedules. You can have a DN in a partition called "AutoAttendant" with X schedule (lets say "autoattendant schedule") so when someone dials that DN in the "autoattendant schedule" time period the call will be sent to the DN that is in the "AutoAttendant" partition and after that will be sent to the UnityConnection that contains the AutoAttendant. If you want to send the call somewhere else you have to configure the same DN but in another partition so if someone dials the DN after or before the "autoattendant schedule" time period the call will be sent to that DN in the other partition that could send the call I don't know maybe to the receptionist.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4