We are not using conference and Transcoding in our network.We have built in VIC 4 FXO and VIC 4 FXS in our system.When I go through show dsp farm
Dspfarm Profile Configuration
Profile ID = 1, Service = CONFERENCING, Resource ID = 1 Profile Description : DO NOT MODIFY, active CCA conference profile - CCA2.0 codec711 Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : ACTIVE Application : SCCP Status : ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 4 Number of Resource Available : 4 Maximum conference participants : 32 Codec Configuration: num_of_codecs:2 Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.