Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

uc500 and conference

Hi,

i want to configure the conference hardware on the uc500, but it doesn't work :

The configuration :

sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 3.1
sccp
!
sccp ccm group 1
bind interface Loopback0
associate ccm 1 priority 1
associate profile 1 register confdspl
keepalive retries 5
!
dspfarm profile 1 conference 
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 1
associate application SCCP

And i got that :

sh dspfarm profile 1
Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1 
Profile Description : 
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP   Status : NOT ASSOCIATED
Resource Provider : FLEX_DSPRM   Status : UP
Number of Resource Configured : 1
Number of Resource Available : 1
Maximum conference participants : 8
Codec Configuration: num_of_codecs:6
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required
VILLE-UC540#Connection closed by foreign host.

I don't know why the SCCP is "NOT ASSOCIATED" ...

If somebody has an idea...

Thanks for all

best regards,

Guillaume

6 REPLIES
Cisco Employee

uc500 and conference

The UC5XX are not a supported media resource for CUCM, you can configure those resources for CME on the UC5XX, but not for CUCM, that's not supported.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

uc500 and conference

Hi,

thanks for the answer, but it's not for CUCM it's for CME on UC540 ...

Guillaume

Cisco Employee

uc500 and conference

OK, have you configured it under telephony-services??

Have you tried doing a shut/no shut of the profile?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

uc500 and conference

Yes i configured this under telephony-services :

sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 3
sdspfarm tag 1 confdspl
conference hardware

and yes i tried doing shut/no of the profile but it changes nothing

uc500 and conference

sccp local [interface]

sccp ccm x.x.x.x identifier 1 version [version]

sccp ccm group 1

bind interface [interface]

exit

sccp

--------

dspfarm profile 1 conference

codec [codec-flavor]

maximum sessions 1

associate application SCCP

--------

sccp ccm group 1

associate ccm 1 priority 1

associate profile 1 register [name]

--------

telephony-service

conference hardware

sdspfarm units 1

sdspfarm tag 1 [name]

--------

create the ephone-dn for conference

Are you really using a CME version 3?

Check if there's a later version available on the following command:

sccp ccm x.x.x.x identifier 1 version [version]

If there's a later version, use it.

Then capture some show commands:

-show dspfarm all

-show ephone-dn conference

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
New Member

uc500 and conference

Hi ,

i change and now there is configured :

sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 7.0
sccp

but it still don't work :

show dspfarm all :

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1 
Profile Description : 
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : RESOURCE ALLOCATED
Application : SCCP   Status : NOT ASSOCIATED
Resource Provider : FLEX_DSPRM   Status : UP
Number of Resource Configured : 1
Number of Resource Available : 1
Maximum conference participants : 8
Codec Configuration: num_of_codecs:6
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required


SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    4   28.3.5   UP     N/A  FREE  conf    1      -         -         -       

Total number of DSPFARM DSP channel(s) 1

and show ephone-dn conference :

show  ephone-dn conference
type         active inactive  numbers
=======================================
Ad-hoc          0       2      550 
DN tags: 150

Ad-hoc          0       2      551 
DN tags: 151

Ad-hoc          0       2      552 
DN tags: 152

Ad-hoc          0       2      553 
DN tags: 153

I don't understand

Thanks for all !

Best regards,

212
Views
0
Helpful
6
Replies
CreatePlease login to create content