we are currently evaluating to replace our asterisk server with a new nice and shiny UC560.
Due to very high security demands in our network we actually have two physically separated networks. One only for our work, which is NOT connected to the internet and another network which IS connected to the internet for our e-mail etc.
While the telephony solution sits within the "internet-network", we need to initiated calls from our "work-network" where our self-written ERP system resides.
My current soultion for this problem is: Our ERP-Server has a 9600bps rs232 connection to a server in our internet-network. When a person clicks a phone-number in our ERP-system, the extension and the number to dial is sent over the serial cable to a perl-daemon. Once the perl-daemon gets a call request it connects via CLI to our asterisk server and issues a call request. the phone of the person who initiated the call starts to ring, once the person takes off the hook asterisk dials the number.
I need to know if I can "easily" replicate such behaviour with an UC560. Is it possible to initiated calls throug telnet or web CLI (as described above) on the UC560?
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...