I'm reading on UC500 data sheet and here in the forums about the limitations of 2 teleworkers, but is not clear.
I want understand if I can register on UC500, 3, 4, or 5 remote ip phone (like 7960) via VPN peer-to-peer.
I know that with CCME with ISR router its possible and there aren't limitations, but with UC500?
I have a customer with one headquarter and two branch office, they already have VPN provided with PIXs and 877, in the headquarter need 6 ip hpones and in branch office they need to put 5 remote phones, can I propose the UC500 with 16 lic or I need ISR?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...