11-11-2009 01:24 PM - edited 03-15-2019 08:28 PM
hello folks
i have a question i'm configuring an uc520. i configured an ip to the physical wan interface however the ip address under telephony-service belongs to a different subnet do you guys recommend that kind of implementation or should i assign the same ip address to the cme ?
thanks
Solved! Go to Solution.
11-11-2009 01:39 PM
Generally, you would not assign the WAN address under telephony-service. The telephony-service address is the address to which your phones will register and will usually be either the loopback or the voice VLAN address.
Hope this helps.
Brandon
11-11-2009 01:39 PM
Generally, you would not assign the WAN address under telephony-service. The telephony-service address is the address to which your phones will register and will usually be either the loopback or the voice VLAN address.
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide