I have looked at a couple posts on my issues and cannot narrow mine down. Inbound calls to FXO fail basically. I used CCA to configure and inbound calls were first plar'ed to the AA. The call comes in and once tranferred to AA the call disconnects. I pushed the plar to an internal phone and there the same thing happens. At the moment I pick up the ringing call the call disconnects. I did a debug VPM all and the message indicates a possible crossed cable. I check the cable connections as well as output for workaround on a related bug relating to possible DSP issues and I do not get the same diagnostics as that bug so I am doubting that was it. Also with the bug the reference typically PVDM2-16 and I have a 32 so I am not thinking it is the same issue. Reboots of the box to not fix this issue. Getting ready to call TAC but I thought I would try hear first. Some more info is that Outbound calls work fine. Placing and receiving calls with a test set work fine. Running CCA 1.9 with 12.4.20 version of IOS. FXO lines are coming off a Cisco IAD from the provider on an integrated circuit (havent breached a provider issue yet as calls with test set work). Any help would be great ( I love handing out Ratings!)
There were some issues with 2801's and a similar issue, but not that I know of for the UC520. I would need to see specific debugs or error messages in order to tell exactly what's going on. ccapi inout and vpm signal specifically.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...